- Fast Straightening Bench
- The solidity of the frame allows an easy positioning of whatever vehicle by way of the 4 universal clamps without any help from access ramps and boards.
- Maxibull features: electrohidraulically operated scissor lifter allowing a max loading capacity of 2500 kgs, height up to upper edge clamps of 1700 mm and minimum height of 140 mm from the ground level.
- Articulated joint for bench lifting
- The safety down-stroke retainer makes the bench very safe for users and bystanders.
- Pulling system with self-revolving steel column having the same pulling capacity of 10 ton on all its pints allowing to never change the pulling direction.
- 4 on wheel trolleys to easily set and fasten vehicles.
- The pulling system can fixed slide all around the frame, be fixed to all points of the round frame and pull from all directions, ie: front rear and sides No demounting and re-mounting operations are required to change its positioning.
- Spray Booth with insulated panels pre – painted white outside
- Air expulsion on 2 rows of grids with frame and paint- stop filters
- Three wings frontal door. One of the doors can be used as service door
Dimension of the frontal door 3,00 x 2,45 -2,75 -2,95
- Filtering Ceiling . Side lights by means of 4 fluorescent
Bulbs for each glassframe
- Electrically Controlled damper for painting and drying phases.
Semiautomatic electric control panel which controls: lights,
- Motor From 5,5 KW to 11KW Motor and fan according to the dimension of the cabin.
- Generator unit complete with; stainless steel heat exchanger
and RIELLO Oil Burner of 180000 Kcak/h
- Anti Vibration joint.
- Spray Booth with insulated panels pre-painted white outside
- Air expulsion on 2 rows of grids with frame and paint-stop filter
- Three wings frontal door. One of the doors can be used as service door Dimension of the frontal door 3,00 x 2,45 -2,75 -2,95
- Filtering Ceiling . Side lights by means of 2 fluorescent Bulbs for each glassframe inclined 30
- Electrically Controlled damper for painting and drying phases.Semiautomatic electric control panel which controls: lights,motor,fan, burner.
- 4 KW or 5,5 KW Motor and fan according to the dimension of the cabin.
- Generator unit complete with; stainless steel heat exchanger and RIELLO Oil Burner of 90000 Kcal/h
|External Size||: 7.0 x 5.3 x 3.5 m|
|Internal Size||: 6.9 x 3.9 x 2.7 m|
|Entrance Width||: 3.0 m|
|Entrance Height||: 2.66 m|
|Fan Capacity||: 24000 m3/h|
|Air Velocity||: 0.3-0.35 m/s|
|Air ventilation||: 332 times/h|
|Max Drying Temperature||: 60o-80o|
|Oil Consumption||: 6-8 L/unit|
|Power||: 16 KW|
|Suitable Automobile Type||: Car|
Wire Or Wireless Bluetooth
|Computer||: Intel Pentium Dual Core|
|Sensor||: 4 Heads – 8 toes 16 CCD Sensor|
|OS||: Windows XP|
|Printing||: Deskjet printer|
|Wheel Size||: 11 inch – 22 inch (Optional 24 inch adapter|
|Measuring Precision||: Setback 0.010
|Measuring Range||: Setback 2.00
Total Toe 50.0mm
|Power||: 100~240V, 50~60Hz, 250W|
|Size||: 660 x 660 x 1070mm|
|Motor Power||: Hydraulic Pump Motor 1.1380V-3Ph 50Hz
(1.5 KW 220V-1Ph 50Hz)
Gearbox Motor 1.8 KW 380V/ 3Ph 50Hz
(2.2KW 220V-1Ph 50Hz)
|Bead Breaker Force||: 15 mpa|
|Rim Diameter||: 14″ – 26″|
|Max Wheel Diameter||: 1500 mm|
|Rim Width||: 760mm|
|Rotating Speed||: 6.5r/min|
|Pneumetic Supply||: 8 – 10 bar|
|Net Weight||: 585 kg|
|Gross Weight||: 800 kg|
Swing Arm Design Semi Automatic
|Power Supply||: 110V/220V/400V, 50Hz~60Hz|
|Motor Power||: 0.75-1.1KW|
|Air Requirement||: 8-10 Bar / 116-145psi|
|Bead Breaker Force||: 2500KGF|
|Working Noise||: < 70dB|
|Max. Tyre Diameter||: 41″/1100mm|
|Max Wheel Width||: 13″/330mm|
|Inside Clamping||: 13″~24″|
|Outside Clamping||: 11″~21″|